PDA

View Full Version : Supported Radio Gateways


keith
06-10-2008, 10:27 AM
<html><table border="1" frame="void"><tr><td>Manufacturer</td><td>Model</td><td># of Radio Ports</td></tr><tr><td>By-Light</td><td>TRICS (http://www.by-light.com/products.asp)</td><td>4,8,12</td></tr><tr><td>C4i</td><td>RIU (http://www.c4i.com/default.asp?id=8)</td><td>4</td></tr><tr><td>Cisco</td><td>E&M with LMR Feature Set IOS (http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094ab9.shtml&sa=X&ei=DEE7TJHIN4mmsQO8oIHaCg&ved=0CBYQzgQoADAA&usg=AFQjCNEmsQhp0IWV5pIBdUjYe0pNIPamkw)</td><td>2,4,6,8,10,12,14,16</td></tr><tr><td>Cistech</td><td>TSoIP (http://www.cistechsolutions.com.au/joomla/content/category/4/15/26/)</td><td>1</td></tr><tr><td>Daniels</td><td>UIC (http://www.danelec.com/products/systems/)</td><td>4</td></tr><tr><td>Dialogic</td><td>DMG4000 (http://www.dialogic.com/products/gateways/DMG4000.htm)</td><td>Depends on cards installed</td></tr><tr><td>ETC</td><td>VG-1400 (http://www.essentialtel.com/etcproducts2.aspx?pid=61)/VG-1800 (http://www.essentialtel.com/etcproducts2.aspx?pid=62)</td><td>4 or 8</td></tr><tr><td>Raytheon JPS</td><td>ACU-T (http://www.raytheon.com/capabilities/products/acu_t/)</td><td>6</td></tr><tr><td>Raytheon JPS</td><td>ACU-1000 (http://www.raytheon.com/capabilities/products/acu1000/)</td><td>12</td></tr><tr><td>Raytheon JPS</td><td>ACU-2000 (http://www.raytheon.com/capabilities/products/acu2000ip/)</td><td>12</td></tr><tr><td>Raytheon JPS</td><td>NXU-2/NXU-2a (http://www.raytheon.com/capabilities/products/nxu_2a/)</td><td>1</td></tr><tr><td>Sanmina-SCI</td><td>TOCNET MCSU (http://www.sanmina-sci.com/markets/tocnet.html)</td><td>3</td></tr><tr><td>Telex-Vega</td><td>IP 223 (http://www.telex.com/radiodispatch/product.aspx?MarketID=12&CategoryID=25&ProductID=79)/NI 223 (http://www.telex.com/radiodispatch/Product.aspx?MarketID=12&CategoryID=25&ProductID=81)</td><td>2</td></tr><tr><td>VoiceInterop</td><td>AM360r (http://www.voiceinterop.com/products/audiomate360.aspx))</td><td>1</td></tr></table>
</html>

kcarpenter
06-16-2008, 09:52 AM
Cisco Router 2811

VIC2-2 E/M Card
Advance Enterprise or IP Services IOS 12.4 (15T1)

If you need more than a couple slots you will also need a NMHD2 module.

If you need FXO/FXS on a slot that's not on the NMHD2 module, you will need additional DSP resources, these are little sticks of what looks like RAM, very easy to install.